here the full steps about building instructions for a stage

About building a stage platform, first of all, you need to obtain two wooden shipping pallets, four 2-by-2 pieces of wood, six ft tall one sheet of 4 feet by 8 feet plywood, two 2-by-2 pieces of wood 4 feet long, one 2-by-2 pieces of wood 8 feet long, four shower curtains, shower curtain rods and set of rings, other tools like hammer and nails, screws and electric screwdriver, staples and cinder blocks.

Then, it is time to create the floor of the stage with the 4 feet by 8 feet plywood sheet , next steps lay it over the wooden pallets, take 6 feet high and 2×2 wood pieces to form four vertical posts of the stage, fix these pieces at all the four corners of the stage.

stage

Thirdly, connect all the above created vertical posts to the shorter ends of stages with 4 feet long 2×2 wood pieces. Make the back curtain of the stage, and take the 8 feet 2×2 wood piece and fix it by screwing it between the back posts.

After the back curtain has been prepared, get three shower curtains and fasten or pin them around the sides and back portion of the stage. The remaining shower curtain is for the front portion. Next, raise the platform by using cinder blocks. Your stage is ready to be used. There is the full steps about building instructions for a stage, may help you.